Axial cooling fan
59VO-6-2A
Price on request
Axial cooling fan
Available on back-order
Description
59VO-6-2A aviation fan
59VO-6-2A is a three-phase axial equipment-cooling fan used to create controlled airflow in the installation specified by the applicable aircraft or equipment documentation. The complete designation is the primary identification key: housing size, motor appearance or a shared voltage does not establish interchangeability.
A fan converts motor power into airflow, but the installed result depends on pressure, duct resistance, mounting and operating conditions. This card separates confirmed data for 59VO-6-2A from general family information.
Function and documented application
Application: Directed cooling of radio-electronic and other installed equipment. The source basis is KRZED catalogue. Where an aircraft type is named, it describes documented use and does not make every modification or installation automatically compatible.
In operation the fan works together with the power circuit, protection devices, wiring or connector, mounting hardware and the airflow path. Correct polarity or phase sequence, clear inlet and outlet paths and secure mounting are necessary for a meaningful functional check.
Identification and related equipment
The public factory table confirms the 59VO-6-2 base family and a G execution, but does not independently display the A suffix. Confirm the complete suffix against the data plate and passport before ordering. Closely related catalogue positions include 40VO-6.5-2A and 220VO-6-2. These links support navigation and system comparison; they do not state that the products are interchangeable.
When checking a removed unit, record the complete nameplate, suffix, serial or drawing reference, connector, airflow direction and mounting dimensions. Photographs of the label and installation position are useful when several visually similar executions exist.
Installation and maintenance checks
Before installation, inspect the housing, impeller or propeller, motor, fasteners, connector or leads and mounting points. The rotating assembly must move freely without contact, deformation or foreign objects. Electrical tests must use the documented supply and protection limits.
Maintenance checks normally cover contamination, unusual noise, vibration, current draw, temperature and actual airflow. Disassembly, lubrication, balancing or component replacement should be performed only under an approved procedure for the exact execution.
Ordering 59VO-6-2A
An enquiry should state the complete 59VO-6-2A marking, quantity, required condition, delivery set and documentation. Condition, test scope, production date and included accessories are confirmed for the offered unit. More products are listed in the Cooling & Ventilation Fans category.
Technical Details
Product Name: 59VO-6-2A
Product Type: Three-phase axial equipment-cooling fan
Primary Designation: 59VO-6-2A
Alternative Designations: 59VO-6-2A; 59VO6-2A; 59 VO 6 2A; 59ВО-6-2А; base family 59ВО-6-2
Application: Directed cooling of radio-electronic and other installed equipment
Technical Basis: AMIV.630250.018 TU (base family)
Supply: 220 ±11 V AC, 400 ±20 Hz, three-phase
Airflow: 570 m³/h
Total pressure: 52 kgf/m²
Input power: Not more than 160 W
Rotational speed: Not less than 7,350 rpm
Current: Not more than 1.0 A
Mass: Not more than 2.5 kg
Sound level: Not more than 76 dBA
Dimensions: 136 × 141 × 135 mm
Selection Basis: Complete marking, suffix, electrical ratings, airflow path, connector and mounting geometry
Interchangeability: Only when confirmed by the applicable parts catalogue or approved documentation
Documentation: Product passport and applicable installation or maintenance documentation
Category: Cooling & Ventilation Fans
Payment & delivery
All shipments are carried out from our international warehouse in Dubai (UAE), as well as from our partners’ remote warehouses.
In Stock — items available in stock at the Dubai warehouse are dispatched within 5–10 business days after receiving 100% prepayment.
Remote Stock — items available at our partners’ remote warehouses are supplied within an average of 30–45 business days after receiving 100% prepayment.
Pre-Order — made-to-order products are manufactured and delivered within an average of 45–60 business days. Payment terms: 50% advance payment to start production, with the remaining 50% paid before dispatch from the Dubai warehouse after full readiness for shipment.
Returns & Changes (Restocking Fee)
For selected items, a RESTOCKING FEE of 10% may apply in case of return, order cancellation, or changes to the order specifications. This condition applies only to certain products and is confirmed at the order approval stage.
Warranty
All products are covered by a standard 6-month warranty.
Extended warranty is available upon request and is agreed individually; it may affect the final product price.
- Description
- Technical Details
- Payment & delivery
59VO-6-2A aviation fan
59VO-6-2A is a three-phase axial equipment-cooling fan used to create controlled airflow in the installation specified by the applicable aircraft or equipment documentation. The complete designation is the primary identification key: housing size, motor appearance or a shared voltage does not establish interchangeability.
A fan converts motor power into airflow, but the installed result depends on pressure, duct resistance, mounting and operating conditions. This card separates confirmed data for 59VO-6-2A from general family information.
Function and documented application
Application: Directed cooling of radio-electronic and other installed equipment. The source basis is KRZED catalogue. Where an aircraft type is named, it describes documented use and does not make every modification or installation automatically compatible.
In operation the fan works together with the power circuit, protection devices, wiring or connector, mounting hardware and the airflow path. Correct polarity or phase sequence, clear inlet and outlet paths and secure mounting are necessary for a meaningful functional check.
Identification and related equipment
The public factory table confirms the 59VO-6-2 base family and a G execution, but does not independently display the A suffix. Confirm the complete suffix against the data plate and passport before ordering. Closely related catalogue positions include 40VO-6.5-2A and 220VO-6-2. These links support navigation and system comparison; they do not state that the products are interchangeable.
When checking a removed unit, record the complete nameplate, suffix, serial or drawing reference, connector, airflow direction and mounting dimensions. Photographs of the label and installation position are useful when several visually similar executions exist.
Installation and maintenance checks
Before installation, inspect the housing, impeller or propeller, motor, fasteners, connector or leads and mounting points. The rotating assembly must move freely without contact, deformation or foreign objects. Electrical tests must use the documented supply and protection limits.
Maintenance checks normally cover contamination, unusual noise, vibration, current draw, temperature and actual airflow. Disassembly, lubrication, balancing or component replacement should be performed only under an approved procedure for the exact execution.
Ordering 59VO-6-2A
An enquiry should state the complete 59VO-6-2A marking, quantity, required condition, delivery set and documentation. Condition, test scope, production date and included accessories are confirmed for the offered unit. More products are listed in the Cooling & Ventilation Fans category.
Product Name: 59VO-6-2A
Product Type: Three-phase axial equipment-cooling fan
Primary Designation: 59VO-6-2A
Alternative Designations: 59VO-6-2A; 59VO6-2A; 59 VO 6 2A; 59ВО-6-2А; base family 59ВО-6-2
Application: Directed cooling of radio-electronic and other installed equipment
Technical Basis: AMIV.630250.018 TU (base family)
Supply: 220 ±11 V AC, 400 ±20 Hz, three-phase
Airflow: 570 m³/h
Total pressure: 52 kgf/m²
Input power: Not more than 160 W
Rotational speed: Not less than 7,350 rpm
Current: Not more than 1.0 A
Mass: Not more than 2.5 kg
Sound level: Not more than 76 dBA
Dimensions: 136 × 141 × 135 mm
Selection Basis: Complete marking, suffix, electrical ratings, airflow path, connector and mounting geometry
Interchangeability: Only when confirmed by the applicable parts catalogue or approved documentation
Documentation: Product passport and applicable installation or maintenance documentation
Category: Cooling & Ventilation Fans
All shipments are carried out from our international warehouse in Dubai (UAE), as well as from our partners’ remote warehouses.
In Stock — items available in stock at the Dubai warehouse are dispatched within 5–10 business days after receiving 100% prepayment.
Remote Stock — items available at our partners’ remote warehouses are supplied within an average of 30–45 business days after receiving 100% prepayment.
Pre-Order — made-to-order products are manufactured and delivered within an average of 45–60 business days. Payment terms: 50% advance payment to start production, with the remaining 50% paid before dispatch from the Dubai warehouse after full readiness for shipment.
Returns & Changes (Restocking Fee)
For selected items, a RESTOCKING FEE of 10% may apply in case of return, order cancellation, or changes to the order specifications. This condition applies only to certain products and is confirmed at the order approval stage.
Warranty
All products are covered by a standard 6-month warranty.
Extended warranty is available upon request and is agreed individually; it may affect the final product price.