40VO-6.5-2A
Axial cooling fan
Description
40VO-6.5-2A aviation fan
40VO-6.5-2A is a three-phase axial equipment-cooling fan used to create controlled airflow in the installation specified by the applicable aircraft or equipment documentation. The complete designation is the primary identification key: housing size, motor appearance or a shared voltage does not establish interchangeability.
A fan converts motor power into airflow, but the installed result depends on pressure, duct resistance, mounting and operating conditions. This card separates confirmed data for 40VO-6.5-2A from general family information.
Full descriptionCollapse description
Function and documented application
Application: Directed cooling of radio-electronic and other installed equipment. The source basis is KRZED catalogue. Where an aircraft type is named, it describes documented use and does not make every modification or installation automatically compatible.
In operation the fan works together with the power circuit, protection devices, wiring or connector, mounting hardware and the airflow path. Correct polarity or phase sequence, clear inlet and outlet paths and secure mounting are necessary for a meaningful functional check.
Identification and related equipment
The comma in the original Cyrillic 40ВО-6,5-2А marking is represented by a decimal point in the stable Latin product name and URL. Closely related catalogue positions include 220VO-12-2A and 25VO-5-2. These links support navigation and system comparison; they do not state that the products are interchangeable.
When checking a removed unit, record the complete nameplate, suffix, serial or drawing reference, connector, airflow direction and mounting dimensions. Photographs of the label and installation position are useful when several visually similar executions exist.
Installation and maintenance checks
Before installation, inspect the housing, impeller or propeller, motor, fasteners, connector or leads and mounting points. The rotating assembly must move freely without contact, deformation or foreign objects. Electrical tests must use the documented supply and protection limits.
Maintenance checks normally cover contamination, unusual noise, vibration, current draw, temperature and actual airflow. Disassembly, lubrication, balancing or component replacement should be performed only under an approved procedure for the exact execution.
Ordering 40VO-6.5-2A
An enquiry should state the complete 40VO-6.5-2A marking, quantity, required condition, delivery set and documentation. Condition, test scope, production date and included accessories are confirmed for the offered unit. More products are listed in the Cooling & Ventilation Fans category.
Technical details
- Product Name
- 40VO-6.5-2A
- Product Type
- Three-phase axial equipment-cooling fan
- Primary Designation
- 40VO-6.5-2A
- Alternative Designations
- 40VO-6.5-2A; 40VO6.5-2A; 40 VO 6.5 2A; 40ВО-6,5-2А
- Application
- Directed cooling of radio-electronic and other installed equipment
All specificationsCollapse specifications
- Technical Basis
- AMIV.630250.009 TU
- Supply
- 220 ±11 V AC, 400 ±20 Hz, three-phase
- Airflow
- 400 m³/h
- Total pressure
- 60 kgf/m²
- Input power
- Not more than 170 W
- Rotational speed
- Not less than 11,000 rpm
- Current
- Not more than 0.70 A
- Mass
- Not more than 1.65 kg
- Sound level
- Not more than 75 dBA
- Dimensions
- 151 × 151 × 111 mm
- Mounting holes
- 7 mm diameter
- Selection Basis
- Complete marking, suffix, electrical ratings, airflow path, connector and mounting geometry
- Interchangeability
- Only when confirmed by the applicable parts catalogue or approved documentation
- Documentation
- Product passport and applicable installation or maintenance documentation
- Category
- Cooling & Ventilation Fans
Payment & delivery
Orders ship from our hub in Dubai. Partner stock is first transferred to Dubai, then shipped to you.
Dubai stock: 100% before dispatch. Partner stock (Remote stock) and Pre-order: 50% advance payment to start the order and 50% before shipment from Dubai to you.
Availability, lead time, delivery cost and payment terms are confirmed for your order before payment.
Payment & delivery terms