Wheel tire remover
SSh-04-000
$8108
Wheel tire remover
Available on back-order
Description
SSh-04-000 Aircraft wheel tire remover
SSh-04-000 is a aircraft wheel tire remover identified through the exact designation and specialist listings. Removal of an aircraft tire from a wheel during wheel-shop or helicopter maintenance operations. This page describes the specific item and does not copy specifications from equipment that merely looks similar.
The Mi-8AMT ground-equipment list records SSh-04-000 as a wheel tire remover and also mentions SSh-07-000 as a separate permitted tool. The shorter SSh04-00 spelling appears in commercial lists, but the manual form with the hyphen and three final zeros is used as the primary designation. This distinction matters in search and procurement: the base number, letter index, suffix and model reference should agree with the applicable documentation or the marking on the available item.
Maintenance role of SSh-04-000
The product is used as ground support equipment. It is not a universal tool simply because another fixture performs a comparable task. Before use, maintenance personnel should confirm the approved task card, serviceability, attachment or connection points, and the permitted aircraft or component configuration.
The two puller models are not declared interchangeable here; wheel size, jaw geometry, operating travel and force must be checked against the exact tool passport. When a value is absent from the located documentation, it is not replaced with a calculation or a specification from a neighbouring model. This keeps the page technically accurate and allows the customer to request a passport, drawing or test record separately.
Designation and compatibility checks
Before ordering, compare SSh-04-000 with the maintenance manual, ground-equipment catalog or delivery-set list. Also verify interfaces, working medium, load or pressure range, included accessories and periodic inspection requirements whenever those characteristics apply to this type of equipment.
Products linked within the same category may support the same aircraft family, but they are not substitutes. A jack, crane, trolley, valve or servicing control unit performs its own operation and must be used only in the documented configuration.
Confirmed and unconfirmed technical data
Product type and preferred designation are confirmed by the Mi-8AMT manual; operating dimensions and rated force remain unconfirmed. Unverified dimensions, mass, pressure, rated capacity or applicability are intentionally omitted. Where a reference value is shown, the text identifies its status and requires confirmation against the passport for the supplied unit.
Incoming inspection should check the identification marking, body and joint condition, completeness, fasteners, hoses, cables, locks and working elements as applicable. Operational readiness is established through records and the approved inspection procedure, not appearance alone.
A technical inquiry is more useful when it includes the manual or equipment-list page that names SSh-04-000, together with photographs of the marking and interfaces on the existing sample. This helps separate the base model from a suffix-specific execution and allows the delivery set to be agreed in advance. For lifting, pumping or pressure-control equipment, the request should also state the required current inspection or test documentation.
Before release to service, a new or stored item should pass the recipient’s approved incoming inspection. Mechanical fixtures require checks for deformation, corrosion, thread damage and locking parts. Hydraulic equipment requires confirmation of fluid compatibility, seal condition and leakage control. Valves and servicing panels require clean passages, correct connections and functional control checks. The operator’s documentation determines subsequent inspection intervals.
Ordering and supply of SSh-04-000
The card uses YOM 2026, Warranty: 6 Months and Pre-Order status. The existing WooCommerce price and stock state are preserved. A useful inquiry should include the exact designation, quantity, maintained aircraft or component, required delivery set and any need for a passport, certificate, drawing or test report.
More products are available in the Ground Support Equipment category. Internal links are provided for navigation between related maintenance items and do not claim interchangeability.
Aircraft reference: Mil Mi-8. It does not replace approved technical documentation.
Related products for category navigation: 140-9908-00, 8AT-9908-00, 246-9908-00, 8MT-9904-00. They may support the same maintenance workflow but are not interchangeable.
Technical Details
Product Type: Aircraft wheel tire remover
Designation: SSh-04-000
Alternative Designations: SSh-04-000; SSh04-00; SSh 04 000; wheel tire puller; aircraft tire remover
Function / Application: Removal of an aircraft tire from a wheel during wheel-shop or helicopter maintenance operations.
Confirmed Technical Information: The Mi-8AMT ground-equipment list records SSh-04-000 as a wheel tire remover and also mentions SSh-07-000 as a separate permitted tool. The shorter SSh04-00 spelling appears in commercial lists, but the manual form with the hyphen and three final zeros is used as the primary designation. The two puller models are not declared interchangeable here; wheel size, jaw geometry, operating travel and force must be checked against the exact tool passport.
Data Verification Status: Product type and preferred designation are confirmed by the Mi-8AMT manual; operating dimensions and rated force remain unconfirmed.
Equipment Category: Aircraft ground support equipment
Condition: New
Warranty: 6 Months
YOM: 2026
Stock Status: Pre-Order
Estimated Lead Time: 90–120 days; subject to confirmation
Technical Documentation: Product passport, drawing, maintenance manual and delivery records when available
Payment & delivery
All shipments are carried out from our international warehouse in Dubai (UAE), as well as from our partners’ remote warehouses.
In Stock — items available in stock at the Dubai warehouse are dispatched within 5–10 business days after receiving 100% prepayment.
Remote Stock — items available at our partners’ remote warehouses are supplied within an average of 30–45 business days after receiving 100% prepayment.
Pre-Order — made-to-order products are manufactured and delivered within an average of 45–60 business days. Payment terms: 50% advance payment to start production, with the remaining 50% paid before dispatch from the Dubai warehouse after full readiness for shipment.
Returns & Changes (Restocking Fee)
For selected items, a RESTOCKING FEE of 10% may apply in case of return, order cancellation, or changes to the order specifications. This condition applies only to certain products and is confirmed at the order approval stage.
Warranty
All products are covered by a standard 6-month warranty.
Extended warranty is available upon request and is agreed individually; it may affect the final product price.
- Description
- Technical Details
- Payment & delivery
SSh-04-000 Aircraft wheel tire remover
SSh-04-000 is a aircraft wheel tire remover identified through the exact designation and specialist listings. Removal of an aircraft tire from a wheel during wheel-shop or helicopter maintenance operations. This page describes the specific item and does not copy specifications from equipment that merely looks similar.
The Mi-8AMT ground-equipment list records SSh-04-000 as a wheel tire remover and also mentions SSh-07-000 as a separate permitted tool. The shorter SSh04-00 spelling appears in commercial lists, but the manual form with the hyphen and three final zeros is used as the primary designation. This distinction matters in search and procurement: the base number, letter index, suffix and model reference should agree with the applicable documentation or the marking on the available item.
Maintenance role of SSh-04-000
The product is used as ground support equipment. It is not a universal tool simply because another fixture performs a comparable task. Before use, maintenance personnel should confirm the approved task card, serviceability, attachment or connection points, and the permitted aircraft or component configuration.
The two puller models are not declared interchangeable here; wheel size, jaw geometry, operating travel and force must be checked against the exact tool passport. When a value is absent from the located documentation, it is not replaced with a calculation or a specification from a neighbouring model. This keeps the page technically accurate and allows the customer to request a passport, drawing or test record separately.
Designation and compatibility checks
Before ordering, compare SSh-04-000 with the maintenance manual, ground-equipment catalog or delivery-set list. Also verify interfaces, working medium, load or pressure range, included accessories and periodic inspection requirements whenever those characteristics apply to this type of equipment.
Products linked within the same category may support the same aircraft family, but they are not substitutes. A jack, crane, trolley, valve or servicing control unit performs its own operation and must be used only in the documented configuration.
Confirmed and unconfirmed technical data
Product type and preferred designation are confirmed by the Mi-8AMT manual; operating dimensions and rated force remain unconfirmed. Unverified dimensions, mass, pressure, rated capacity or applicability are intentionally omitted. Where a reference value is shown, the text identifies its status and requires confirmation against the passport for the supplied unit.
Incoming inspection should check the identification marking, body and joint condition, completeness, fasteners, hoses, cables, locks and working elements as applicable. Operational readiness is established through records and the approved inspection procedure, not appearance alone.
A technical inquiry is more useful when it includes the manual or equipment-list page that names SSh-04-000, together with photographs of the marking and interfaces on the existing sample. This helps separate the base model from a suffix-specific execution and allows the delivery set to be agreed in advance. For lifting, pumping or pressure-control equipment, the request should also state the required current inspection or test documentation.
Before release to service, a new or stored item should pass the recipient’s approved incoming inspection. Mechanical fixtures require checks for deformation, corrosion, thread damage and locking parts. Hydraulic equipment requires confirmation of fluid compatibility, seal condition and leakage control. Valves and servicing panels require clean passages, correct connections and functional control checks. The operator’s documentation determines subsequent inspection intervals.
Ordering and supply of SSh-04-000
The card uses YOM 2026, Warranty: 6 Months and Pre-Order status. The existing WooCommerce price and stock state are preserved. A useful inquiry should include the exact designation, quantity, maintained aircraft or component, required delivery set and any need for a passport, certificate, drawing or test report.
More products are available in the Ground Support Equipment category. Internal links are provided for navigation between related maintenance items and do not claim interchangeability.
Aircraft reference: Mil Mi-8. It does not replace approved technical documentation.
Related products for category navigation: 140-9908-00, 8AT-9908-00, 246-9908-00, 8MT-9904-00. They may support the same maintenance workflow but are not interchangeable.
Product Type: Aircraft wheel tire remover
Designation: SSh-04-000
Alternative Designations: SSh-04-000; SSh04-00; SSh 04 000; wheel tire puller; aircraft tire remover
Function / Application: Removal of an aircraft tire from a wheel during wheel-shop or helicopter maintenance operations.
Confirmed Technical Information: The Mi-8AMT ground-equipment list records SSh-04-000 as a wheel tire remover and also mentions SSh-07-000 as a separate permitted tool. The shorter SSh04-00 spelling appears in commercial lists, but the manual form with the hyphen and three final zeros is used as the primary designation. The two puller models are not declared interchangeable here; wheel size, jaw geometry, operating travel and force must be checked against the exact tool passport.
Data Verification Status: Product type and preferred designation are confirmed by the Mi-8AMT manual; operating dimensions and rated force remain unconfirmed.
Equipment Category: Aircraft ground support equipment
Condition: New
Warranty: 6 Months
YOM: 2026
Stock Status: Pre-Order
Estimated Lead Time: 90–120 days; subject to confirmation
Technical Documentation: Product passport, drawing, maintenance manual and delivery records when available
All shipments are carried out from our international warehouse in Dubai (UAE), as well as from our partners’ remote warehouses.
In Stock — items available in stock at the Dubai warehouse are dispatched within 5–10 business days after receiving 100% prepayment.
Remote Stock — items available at our partners’ remote warehouses are supplied within an average of 30–45 business days after receiving 100% prepayment.
Pre-Order — made-to-order products are manufactured and delivered within an average of 45–60 business days. Payment terms: 50% advance payment to start production, with the remaining 50% paid before dispatch from the Dubai warehouse after full readiness for shipment.
Returns & Changes (Restocking Fee)
For selected items, a RESTOCKING FEE of 10% may apply in case of return, order cancellation, or changes to the order specifications. This condition applies only to certain products and is confirmed at the order approval stage.
Warranty
All products are covered by a standard 6-month warranty.
Extended warranty is available upon request and is agreed individually; it may affect the final product price.