Hydraulic system hose
4824A-U4-410
$335
Hydraulic system hose
Available on back-order
Description
4824A-U4-410 hose for the An-12 aircraft
4824A-U4-410 is a Type U rubber hose assembly with cotton braids and fittings recorded in the supplied hose lists for the Antonov An-12 aircraft. The designation matches in both supplied source lists. The card keeps the documented cipher, normal and standard without merging the item with visually similar executions.
The assembly provides a flexible connection in an onboard pipeline and can accommodate routing, vibration and limited relative movement between connected elements. Exact connected units and installation points are not added when the supplied documentation does not identify them.
4824A-U4-410 application within the An-12 system
Recorded system assignment: The exact onboard system is not specified in the supplied document list. This classification links the product to the relevant section of the technical list, but it does not independently establish a particular aircraft modification, circuit branch or physical installation point.
Hoses used on one aircraft type may differ in length, internal diameter, reinforcement, thread, fitting geometry and end orientation. Related catalogue positions therefore support navigation and are not presented as replacements, equivalents or interchangeable assemblies.
Cipher, normal and OST identification
Primary cipher or drawing: 4824A-U4-410. Corresponding normal: 6-4-2-410 OST1 13813-81. Standard reference: OST1 13813-81. The matched source data do not state a quantity, so none is inferred.
Every digit, hyphen and letter suffix should be retained in an inquiry. Different lengths, prefixes and suffixes are catalogued separately. A convenient search form does not replace the source designation or prove interchangeability.
Hose construction and technical verification
Available product type: Type U rubber hose assembly with cotton braids and fittings. Technical reference or construction type: TU 38.0051515-92. Working medium: Oils AMG-10, MK-8 and transformer oil; fuels T-1, T-2 and TS-1; gasoline, water and air. These details are carried over only from a source row or group matched to the exact designation.
Reliable dimensions, mass, minimum bend radius, operating pressure, temperature range and connection sizes for this exact position were not found in the supplied sources. Confirm them through the product passport, drawing and applicable An-12 documentation.
Before installation, inspect the marking, flexible body, ferrules and fittings for cracking, kinking, corrosion, contamination, damaged threads or storage defects. Compare the removed and supplied assemblies by length, diameter, connections and relative orientation of the ends.
Incoming inspection should also verify YOM, protective caps, internal cleanliness and accompanying documents. The representative photograph shows a group of aviation hoses and does not confirm the individual marking of a particular supplied unit.
Installation suitability is checked by more than overall length. Compare the flexible-section length, ferrule positions, thread type and size, fitting angles and end orientation. An installed hose must not be twisted, sharply bent, routed against an edge or hot surface, or interfere with moving equipment. Use the aircraft installation documentation to confirm bend radius, clearances and clamp locations.
Keep the connection ends capped before installation so dust, moisture and foreign material cannot enter the assembly. At receipt, inspect packaging, marking and visible storage condition. Storage life, assigned service life and calendar limits cannot be judged from appearance; use the passport, certificate and current documentation for the exact position.
Ordering 4824A-U4-410 and related An-12 hoses
4824A-U4-410 is listed in the Aviamisto Hoses for An-12 category and is available on a pre-order basis. State the complete designation, required quantity, aircraft modification and documentation requirements in the inquiry.
Related positions: 4609A-P6-240-480, 4609A-P6-240-650, 4609A-P8-240-470, 4580A-M4-360. They are connected through the supplied lists for one aircraft type but are not interchangeable products without direct confirmation in the controlling technical documentation.
An-12 hose application
The exact 4824A-U4-410 cipher also appears in the supplied hose list for the Antonov An-12 aircraft. The source gives the newer An-12 normal 6-4-2-410 OST1 13813-81. This adds a confirmed application to the existing product card and does not make other hose positions interchangeable.
The product is included in the internal Hoses for An-12 category. Related An-12 positions: 4824A-U4-420, 4824A-U4-705, 4824A-U4-800, 4824A-U4-980. These links support navigation within one aircraft list and do not identify equivalents or replacements.
Technical Details
Product Type: Hydraulic hose assembly
Designation / Part Number: 4824A-U4-410
Alternative Designations: 6-4-2-410 OST1 13818-81
New-Edition Normal / OST: 6-4-2-410 OST1 13818-81
Aircraft Type: Mi-8 / Mi-17
System: Hydraulic System
Function: Flexible sealed connection between sections of the documented onboard system
Technical Specification / Type: Exact normal, OST or drawing recorded in the supplied list
Working Medium: Not specified for this exact position in the supplied Offer List
Installation Area: Exact installation position requires documentation for the applicable helicopter modification
Dimensions: Reliable execution-specific data were not found in the supplied sources
Operating Pressure: Reliable execution-specific data were not found in the supplied sources
Operating Temperature: Reliable execution-specific data were not found in the supplied sources
Mass: Reliable execution-specific data were not found in the supplied sources
Interchangeability: Not confirmed; related positions are not replacements
Price: $335
Delivery Time: 60-90 days
Condition: New
Warranty: 6 Months
YOM: 2026
Stock Status: Pre-Order
Technical Documentation: Offer List, supplied technical lists, product passport, drawing and helicopter documentation when available
An-12 Source-List Applicability: The exact cipher also appears in the supplied An-12 hose list; this confirms an additional application but not interchangeability with other positions.
Designation in the An-12 List: 4824A-U4-410
New Normal / OST for An-12: 6-4-2-410 OST1 13813-81
Payment & delivery
All shipments are carried out from our international warehouse in Dubai (UAE), as well as from our partners’ remote warehouses.
In Stock — items available in stock at the Dubai warehouse are dispatched within 5–10 business days after receiving 100% prepayment.
Remote Stock — items available at our partners’ remote warehouses are supplied within an average of 30–45 business days after receiving 100% prepayment.
Pre-Order — made-to-order products are manufactured and delivered within an average of 45–60 business days. Payment terms: 50% advance payment to start production, with the remaining 50% paid before dispatch from the Dubai warehouse after full readiness for shipment.
Returns & Changes (Restocking Fee)
For selected items, a RESTOCKING FEE of 10% may apply in case of return, order cancellation, or changes to the order specifications. This condition applies only to certain products and is confirmed at the order approval stage.
Warranty
All products are covered by a standard 6-month warranty.
Extended warranty is available upon request and is agreed individually; it may affect the final product price.
- Description
- Technical Details
- Payment & delivery
4824A-U4-410 hose for the An-12 aircraft
4824A-U4-410 is a Type U rubber hose assembly with cotton braids and fittings recorded in the supplied hose lists for the Antonov An-12 aircraft. The designation matches in both supplied source lists. The card keeps the documented cipher, normal and standard without merging the item with visually similar executions.
The assembly provides a flexible connection in an onboard pipeline and can accommodate routing, vibration and limited relative movement between connected elements. Exact connected units and installation points are not added when the supplied documentation does not identify them.
4824A-U4-410 application within the An-12 system
Recorded system assignment: The exact onboard system is not specified in the supplied document list. This classification links the product to the relevant section of the technical list, but it does not independently establish a particular aircraft modification, circuit branch or physical installation point.
Hoses used on one aircraft type may differ in length, internal diameter, reinforcement, thread, fitting geometry and end orientation. Related catalogue positions therefore support navigation and are not presented as replacements, equivalents or interchangeable assemblies.
Cipher, normal and OST identification
Primary cipher or drawing: 4824A-U4-410. Corresponding normal: 6-4-2-410 OST1 13813-81. Standard reference: OST1 13813-81. The matched source data do not state a quantity, so none is inferred.
Every digit, hyphen and letter suffix should be retained in an inquiry. Different lengths, prefixes and suffixes are catalogued separately. A convenient search form does not replace the source designation or prove interchangeability.
Hose construction and technical verification
Available product type: Type U rubber hose assembly with cotton braids and fittings. Technical reference or construction type: TU 38.0051515-92. Working medium: Oils AMG-10, MK-8 and transformer oil; fuels T-1, T-2 and TS-1; gasoline, water and air. These details are carried over only from a source row or group matched to the exact designation.
Reliable dimensions, mass, minimum bend radius, operating pressure, temperature range and connection sizes for this exact position were not found in the supplied sources. Confirm them through the product passport, drawing and applicable An-12 documentation.
Before installation, inspect the marking, flexible body, ferrules and fittings for cracking, kinking, corrosion, contamination, damaged threads or storage defects. Compare the removed and supplied assemblies by length, diameter, connections and relative orientation of the ends.
Incoming inspection should also verify YOM, protective caps, internal cleanliness and accompanying documents. The representative photograph shows a group of aviation hoses and does not confirm the individual marking of a particular supplied unit.
Installation suitability is checked by more than overall length. Compare the flexible-section length, ferrule positions, thread type and size, fitting angles and end orientation. An installed hose must not be twisted, sharply bent, routed against an edge or hot surface, or interfere with moving equipment. Use the aircraft installation documentation to confirm bend radius, clearances and clamp locations.
Keep the connection ends capped before installation so dust, moisture and foreign material cannot enter the assembly. At receipt, inspect packaging, marking and visible storage condition. Storage life, assigned service life and calendar limits cannot be judged from appearance; use the passport, certificate and current documentation for the exact position.
Ordering 4824A-U4-410 and related An-12 hoses
4824A-U4-410 is listed in the Aviamisto Hoses for An-12 category and is available on a pre-order basis. State the complete designation, required quantity, aircraft modification and documentation requirements in the inquiry.
Related positions: 4609A-P6-240-480, 4609A-P6-240-650, 4609A-P8-240-470, 4580A-M4-360. They are connected through the supplied lists for one aircraft type but are not interchangeable products without direct confirmation in the controlling technical documentation.
An-12 hose application
The exact 4824A-U4-410 cipher also appears in the supplied hose list for the Antonov An-12 aircraft. The source gives the newer An-12 normal 6-4-2-410 OST1 13813-81. This adds a confirmed application to the existing product card and does not make other hose positions interchangeable.
The product is included in the internal Hoses for An-12 category. Related An-12 positions: 4824A-U4-420, 4824A-U4-705, 4824A-U4-800, 4824A-U4-980. These links support navigation within one aircraft list and do not identify equivalents or replacements.
Product Type: Hydraulic hose assembly
Designation / Part Number: 4824A-U4-410
Alternative Designations: 6-4-2-410 OST1 13818-81
New-Edition Normal / OST: 6-4-2-410 OST1 13818-81
Aircraft Type: Mi-8 / Mi-17
System: Hydraulic System
Function: Flexible sealed connection between sections of the documented onboard system
Technical Specification / Type: Exact normal, OST or drawing recorded in the supplied list
Working Medium: Not specified for this exact position in the supplied Offer List
Installation Area: Exact installation position requires documentation for the applicable helicopter modification
Dimensions: Reliable execution-specific data were not found in the supplied sources
Operating Pressure: Reliable execution-specific data were not found in the supplied sources
Operating Temperature: Reliable execution-specific data were not found in the supplied sources
Mass: Reliable execution-specific data were not found in the supplied sources
Interchangeability: Not confirmed; related positions are not replacements
Price: $335
Delivery Time: 60-90 days
Condition: New
Warranty: 6 Months
YOM: 2026
Stock Status: Pre-Order
Technical Documentation: Offer List, supplied technical lists, product passport, drawing and helicopter documentation when available
An-12 Source-List Applicability: The exact cipher also appears in the supplied An-12 hose list; this confirms an additional application but not interchangeability with other positions.
Designation in the An-12 List: 4824A-U4-410
New Normal / OST for An-12: 6-4-2-410 OST1 13813-81
All shipments are carried out from our international warehouse in Dubai (UAE), as well as from our partners’ remote warehouses.
In Stock — items available in stock at the Dubai warehouse are dispatched within 5–10 business days after receiving 100% prepayment.
Remote Stock — items available at our partners’ remote warehouses are supplied within an average of 30–45 business days after receiving 100% prepayment.
Pre-Order — made-to-order products are manufactured and delivered within an average of 45–60 business days. Payment terms: 50% advance payment to start production, with the remaining 50% paid before dispatch from the Dubai warehouse after full readiness for shipment.
Returns & Changes (Restocking Fee)
For selected items, a RESTOCKING FEE of 10% may apply in case of return, order cancellation, or changes to the order specifications. This condition applies only to certain products and is confirmed at the order approval stage.
Warranty
All products are covered by a standard 6-month warranty.
Extended warranty is available upon request and is agreed individually; it may affect the final product price.