AUASP-6KR

System function

The system receives signals from aerodynamic-angle and load-factor sensors, processes them and supplies information to an indicator and warning channel. Angle of attack describes the orientation of an aerodynamic profile relative to the oncoming airflow; the general principle is explained in the reference on angle of attack. Thresholds, ranges and warning logic depend on the execution and approved aircraft documentation.

The measurement chain must be considered as one system. A sensor produces the source signal, a computing or matching unit converts it, and the indicator and warning channel present the result to the crew. An individual component therefore cannot be ordered from the generic AUASP name alone. Correct identification requires the execution number, required unit designation, connector arrangement, scale and calibration information. Settings from one set are not automatically valid for another.

Exact application is established from the aircraft maintenance manual and illustrated parts catalogue. This description intentionally avoids assigning a universal aircraft list: related family designations can occur in different equipment sets, while approval depends on the installed modification, wiring arrangement and applicable service bulletins.

Equipment set and installation

An AUASP designation may refer to a system, a set or a particular equipment execution. A set can include a sensor, indicator, processing unit and interconnecting components, but the exact delivery composition must be confirmed by passport. The contents of one variant must not be transferred to another because the number is similar.

Related executions include AUASP-31KR, AUASP-6R BK-2R, AUASP-29R. These links provide navigation and comparison only and do not establish interchangeability. Connector configuration, indicator scale, calibration and approved installation must be checked in the illustrated parts catalogue and maintenance manual.

Inspection and maintenance

Incoming inspection should verify the marking of every supplied component, housing and connector condition, seals, completeness and supporting documentation. Functional testing is performed on the applicable test bench or in the aircraft according to an approved procedure. Using thresholds or calibration data from another execution is not acceptable.

Ordering AUASP-6KR

An inquiry should state the complete AUASP-6KR / АУАСП-6КР designation, aircraft type, whether a complete set or individual unit is required, condition and passport requirement. More measuring components are listed in the Sensors category. Applicability and delivery composition are matched by documentation rather than visual similarity.