Angle-of-Attack System
AUASP-28R
Price on request
Angle-of-Attack System
Available on back-order
Description
AUASP-28R angle-of-attack monitoring system
AUASP-28R is an execution of an aircraft automatic angle-of-attack and overload warning system. The equipment provides the crew with measured and processed information used to monitor approach to critical flight conditions. It is not an electrical circuit breaker; the product belongs to sensing and warning equipment and is therefore classified under Sensors.
The Latin designation AUASP-28R and original Cyrillic marking АУАСП-28Р identify the same execution. Every suffix must be retained because it may distinguish the equipment set, indicator version, associated sensor or another construction modification.
System function
The system receives signals from aerodynamic-angle and load-factor sensors, processes them and supplies information to an indicator and warning channel. Angle of attack describes the orientation of an aerodynamic profile relative to the oncoming airflow; the general principle is explained in the reference on angle of attack. Thresholds, ranges and warning logic depend on the execution and approved aircraft documentation.
The measurement chain must be considered as one system. A sensor produces the source signal, a computing or matching unit converts it, and the indicator and warning channel present the result to the crew. An individual component therefore cannot be ordered from the generic AUASP name alone. Correct identification requires the execution number, required unit designation, connector arrangement, scale and calibration information. Settings from one set are not automatically valid for another.
Exact application is established from the aircraft maintenance manual and illustrated parts catalogue. This description intentionally avoids assigning a universal aircraft list: related family designations can occur in different equipment sets, while approval depends on the installed modification, wiring arrangement and applicable service bulletins.
Equipment set and installation
An AUASP designation may refer to a system, a set or a particular equipment execution. A set can include a sensor, indicator, processing unit and interconnecting components, but the exact delivery composition must be confirmed by passport. The contents of one variant must not be transferred to another because the number is similar.
Related executions include AUASP-26R, AUASP-29R, AUASP-25R. These links provide navigation and comparison only and do not establish interchangeability. Connector configuration, indicator scale, calibration and approved installation must be checked in the illustrated parts catalogue and maintenance manual.
Inspection and maintenance
Incoming inspection should verify the marking of every supplied component, housing and connector condition, seals, completeness and supporting documentation. Functional testing is performed on the applicable test bench or in the aircraft according to an approved procedure. Using thresholds or calibration data from another execution is not acceptable.
Ordering AUASP-28R
An inquiry should state the complete AUASP-28R / АУАСП-28Р designation, aircraft type, whether a complete set or individual unit is required, condition and passport requirement. More measuring components are listed in the Sensors category. Applicability and delivery composition are matched by documentation rather than visual similarity.
Technical Details
Product Type: Angle-of-attack and overload warning system
Primary Designation: AUASP-28R
Original Cyrillic Designation: АУАСП-28Р
Function: Angle-of-attack and load-factor measurement, indication and warning
Set Composition: Defined by the passport for the exact execution
Application: Per aircraft parts catalogue and approved documentation
Interchangeability: Only after checking set, connectors, scale and calibration
Documentation: System passport and aircraft maintenance manual
Category: Sensors
Payment & delivery
All shipments are carried out from our international warehouse in Dubai (UAE), as well as from our partners’ remote warehouses.
In Stock — items available in stock at the Dubai warehouse are dispatched within 5–10 business days after receiving 100% prepayment.
Remote Stock — items available at our partners’ remote warehouses are supplied within an average of 30–45 business days after receiving 100% prepayment.
Pre-Order — made-to-order products are manufactured and delivered within an average of 45–60 business days. Payment terms: 50% advance payment to start production, with the remaining 50% paid before dispatch from the Dubai warehouse after full readiness for shipment.
Returns & Changes (Restocking Fee)
For selected items, a RESTOCKING FEE of 10% may apply in case of return, order cancellation, or changes to the order specifications. This condition applies only to certain products and is confirmed at the order approval stage.
Warranty
All products are covered by a standard 6-month warranty.
Extended warranty is available upon request and is agreed individually; it may affect the final product price.
- Description
- Technical Details
- Payment & delivery
AUASP-28R angle-of-attack monitoring system
AUASP-28R is an execution of an aircraft automatic angle-of-attack and overload warning system. The equipment provides the crew with measured and processed information used to monitor approach to critical flight conditions. It is not an electrical circuit breaker; the product belongs to sensing and warning equipment and is therefore classified under Sensors.
The Latin designation AUASP-28R and original Cyrillic marking АУАСП-28Р identify the same execution. Every suffix must be retained because it may distinguish the equipment set, indicator version, associated sensor or another construction modification.
System function
The system receives signals from aerodynamic-angle and load-factor sensors, processes them and supplies information to an indicator and warning channel. Angle of attack describes the orientation of an aerodynamic profile relative to the oncoming airflow; the general principle is explained in the reference on angle of attack. Thresholds, ranges and warning logic depend on the execution and approved aircraft documentation.
The measurement chain must be considered as one system. A sensor produces the source signal, a computing or matching unit converts it, and the indicator and warning channel present the result to the crew. An individual component therefore cannot be ordered from the generic AUASP name alone. Correct identification requires the execution number, required unit designation, connector arrangement, scale and calibration information. Settings from one set are not automatically valid for another.
Exact application is established from the aircraft maintenance manual and illustrated parts catalogue. This description intentionally avoids assigning a universal aircraft list: related family designations can occur in different equipment sets, while approval depends on the installed modification, wiring arrangement and applicable service bulletins.
Equipment set and installation
An AUASP designation may refer to a system, a set or a particular equipment execution. A set can include a sensor, indicator, processing unit and interconnecting components, but the exact delivery composition must be confirmed by passport. The contents of one variant must not be transferred to another because the number is similar.
Related executions include AUASP-26R, AUASP-29R, AUASP-25R. These links provide navigation and comparison only and do not establish interchangeability. Connector configuration, indicator scale, calibration and approved installation must be checked in the illustrated parts catalogue and maintenance manual.
Inspection and maintenance
Incoming inspection should verify the marking of every supplied component, housing and connector condition, seals, completeness and supporting documentation. Functional testing is performed on the applicable test bench or in the aircraft according to an approved procedure. Using thresholds or calibration data from another execution is not acceptable.
Ordering AUASP-28R
An inquiry should state the complete AUASP-28R / АУАСП-28Р designation, aircraft type, whether a complete set or individual unit is required, condition and passport requirement. More measuring components are listed in the Sensors category. Applicability and delivery composition are matched by documentation rather than visual similarity.
Product Type: Angle-of-attack and overload warning system
Primary Designation: AUASP-28R
Original Cyrillic Designation: АУАСП-28Р
Function: Angle-of-attack and load-factor measurement, indication and warning
Set Composition: Defined by the passport for the exact execution
Application: Per aircraft parts catalogue and approved documentation
Interchangeability: Only after checking set, connectors, scale and calibration
Documentation: System passport and aircraft maintenance manual
Category: Sensors
All shipments are carried out from our international warehouse in Dubai (UAE), as well as from our partners’ remote warehouses.
In Stock — items available in stock at the Dubai warehouse are dispatched within 5–10 business days after receiving 100% prepayment.
Remote Stock — items available at our partners’ remote warehouses are supplied within an average of 30–45 business days after receiving 100% prepayment.
Pre-Order — made-to-order products are manufactured and delivered within an average of 45–60 business days. Payment terms: 50% advance payment to start production, with the remaining 50% paid before dispatch from the Dubai warehouse after full readiness for shipment.
Returns & Changes (Restocking Fee)
For selected items, a RESTOCKING FEE of 10% may apply in case of return, order cancellation, or changes to the order specifications. This condition applies only to certain products and is confirmed at the order approval stage.
Warranty
All products are covered by a standard 6-month warranty.
Extended warranty is available upon request and is agreed individually; it may affect the final product price.