246-6200-40

246-6200-40 hose for the Mi-24 helicopter

246-6200-40 is a Oil system hose assembly recorded in the supplied hose lists for the Mil Mi-24 helicopter. The designation and system assignment come from the supplied Mi-24 spreadsheet. The card keeps the documented cipher, normal and standard without merging the item with visually similar executions.

The assembly provides a flexible connection in an onboard pipeline and can accommodate routing, vibration and limited relative movement between connected elements. Exact connected units and installation points are not added when the supplied documentation does not identify them.

246-6200-40 application within the Mi-24 system

Recorded system assignment: Aircraft oil system. This classification links the product to the relevant section of the technical list, but it does not independently establish a particular helicopter modification, circuit branch or physical installation point.

Hoses used on one aircraft type may differ in length, internal diameter, reinforcement, thread, fitting geometry and end orientation. Related catalogue positions therefore support navigation and are not presented as replacements, equivalents or interchangeable assemblies.

Cipher, normal and OST identification

No separate normal is recorded in the source. No separate OST is recorded for this position. The matched source data do not state a quantity, so none is inferred.

Every digit, hyphen and letter suffix should be retained in an inquiry. Different lengths, prefixes and suffixes are catalogued separately. A convenient search form does not replace the source designation or prove interchangeability.

Hose construction and technical verification

Available product type: Oil system hose assembly. Technical reference or construction type: Exact normal, OST or drawing recorded in the supplied list. Working medium: The source assigns the hose to an oil system but does not specify the exact approved oil for this position. These details are carried over only from a source row or group matched to the exact designation.

Reliable dimensions, mass, minimum bend radius, operating pressure, temperature range and connection sizes for this exact position were not found in the supplied sources. Confirm them through the product passport, drawing and applicable Mi-24 documentation.

Before installation, inspect the marking, flexible body, ferrules and fittings for cracking, kinking, corrosion, contamination, damaged threads or storage defects. Compare the removed and supplied assemblies by length, diameter, connections and relative orientation of the ends.

Incoming inspection should also verify YOM, protective caps, internal cleanliness and accompanying documents. The representative photograph shows a group of aviation hoses and does not confirm the individual marking of a particular supplied unit.

Installation suitability is checked by more than overall length. Compare the flexible-section length, ferrule positions, thread type and size, fitting angles and end orientation. An installed hose must not be twisted, sharply bent, routed against an edge or hot surface, or interfere with moving equipment. Use the helicopter installation documentation to confirm bend radius, clearances and clamp locations.

Keep the connection ends capped before installation so dust, moisture and foreign material cannot enter the assembly. At receipt, inspect packaging, marking and visible storage condition. Storage life, assigned service life and calendar limits cannot be judged from appearance; use the passport, certificate and current documentation for the exact position.

Ordering 246-6200-40 and related Mi-24 hoses

246-6200-40 is listed in the Aviamisto Hoses for Mi-24 category and is available on a pre-order basis. State the complete designation, required quantity, helicopter modification and documentation requirements in the inquiry.

Related positions: 24-6200-50-1, 242-6200-50-1A, 24-6200-50-2, 242-6200-50-2A. They are connected through the supplied lists for one helicopter type but are not interchangeable products without direct confirmation in the controlling technical documentation.

Product Type: Oil system hose assembly

Designation / Part Number: 246-6200-40

Alternative Designations: 246 6200 40

Cipher / Drawing: No separate cipher or drawing recorded

Normal: No separate normal recorded

OST: No separate OST recorded

Technical Specification / Type: Exact normal, OST or drawing recorded in the supplied list

Aircraft Type: Mi-24

System: Aircraft oil system

Application: Hose from the supplied Mi-24 lists; exact modification and installation position require aircraft documentation

Working Medium: The source assigns the hose to an oil system but does not specify the exact approved oil for this position.

Quantity in Supplied List: Not specified

Dimensions: Reliable data not found in the supplied materials or open sources

Operating Pressure: Reliable data for this position were not found

Operating Temperature: Reliable data for this position were not found

Mass: Reliable data not found in the supplied materials or open sources

Interchangeability: Not confirmed; related positions are not replacements

Condition: New

Warranty: 6 Months

YOM: 2026

Stock Status: Pre-Order

Technical Documentation: Supplied Mi-24 lists, product passport, drawing and helicopter documentation when available

All shipments are carried out from our international warehouse in Dubai (UAE), as well as from our partners’ remote warehouses.

In Stock — items available in stock at the Dubai warehouse are dispatched within 5–10 business days after receiving 100% prepayment.

Remote Stock — items available at our partners’ remote warehouses are supplied within an average of 30–45 business days after receiving 100% prepayment.

Pre-Order — made-to-order products are manufactured and delivered within an average of 45–60 business days. Payment terms: 50% advance payment to start production, with the remaining 50% paid before dispatch from the Dubai warehouse after full readiness for shipment.

Returns & Changes (Restocking Fee)
For selected items, a RESTOCKING FEE of 10% may apply in case of return, order cancellation, or changes to the order specifications. This condition applies only to certain products and is confirmed at the order approval stage.

Warranty
All products are covered by a standard 6-month warranty.
Extended warranty is available upon request and is agreed individually; it may affect the final product price.