8D0.447.018-40-56

8D0.447.018-40-56 hose identification and aircraft applicability

8D0.447.018-40-56 is a Fluoroplastic hose assembly with permanently attached fittings recorded in the supplied lists for the An-124. Confirmed applicability on this page: An-124. The designation and aircraft applicability were cross-checked between the supplied aircraft lists where corresponding rows were available.

The item is treated as a flexible connection within an onboard pipeline. It can accommodate routing, vibration and limited relative movement between connected elements, but exact connected units, installation points and flow direction are not added when the source materials do not identify them.

Function in the documented onboard system

Recorded system assignment: The exact onboard system is not specified in the supplied document list. This classification identifies the applicable system section but does not independently establish a circuit branch, physical installation point or interchangeability with a neighbouring position. One aircraft type can use visually similar assemblies that differ in length, fittings, reinforcement and operating limits.

The technical role of the hose is to maintain a sealed flexible path for the approved working medium between connected parts of the system. Allowable pressure, temperature, bend radius and service limits for the exact execution must come from its passport, drawing and current documentation for the applicable aircraft.

Normal, OST and configuration checks for 8D0.447.018-40-56

Recorded designations and technical references: 8D0.447.018-40-56. Alternative search forms: NV.A.2.10.01.01.560; 8D0.447.018 40 56. Technical specification or construction type: TU 6-05-041-659-80. Working medium for the confirmed group: Air and gaseous nitrogen; approved aviation oils, hydraulic fluids and fuels listed in the supplied An-124 document, at pressure not exceeding 110 kgf/cm² where stated.

Retain every digit, point, hyphen and letter suffix in an inquiry. Different lengths and base normals are catalogued as separate products. A matching dimension, appearance or partial designation does not demonstrate that another hose is an approved replacement.

Inspection, installation and documentation

Incoming inspection should verify the Part Number, normal, OST reference, YOM, flexible body, ferrules, fittings, protective caps and internal cleanliness. Check for cracking, kinking, swelling, corrosion, contamination, damaged threads and evidence of unsuitable storage. The representative image shows a group of aviation hoses and does not confirm the individual marking of a particular supplied unit.

Compare the removed and supplied assemblies by controlled length, internal diameter, connection hardware, fitting angles and relative orientation. An installed hose must not be twisted, sharply bent, routed against an edge or hot surface, or interfere with adjacent equipment. Use the aircraft installation documentation to establish bend radius, clearances, supports and clamp positions.

Reliable dimensions, mass, exact operating pressure, temperature range, assigned life and storage limit for this execution were not found in the available sources. These values must not be copied from a neighbouring position or inferred from the photograph; confirm them through the product passport, certificate, drawing and aircraft documentation.

Ordering and related Antonov hoses

8D0.447.018-40-56 is published in the Aviamisto Hoses for An-72 / An-74 / An-124 category and is available on a pre-order basis by default. State the complete designation, aircraft type, required quantity and passport or documentation requirements in the inquiry.

Related positions: 1-6-400 OST1 13816-81, 1-6-450 OST1 13816-82, 1.4000.5644.310.000, 1.4000.5644.680.000. They are selected from the same combined subcategory and share documented aircraft applicability, but they are not presented as equivalents or interchangeable products without direct technical confirmation.

Product Type: Fluoroplastic hose assembly with permanently attached fittings

Designation / Part Number: 8D0.447.018-40-56

Alternative Designations: NV.A.2.10.01.01.560; 8D0.447.018 40 56

Cipher / Drawing: 8D0.447.018-40-56

Normal / OST: No separate normal recorded

Aircraft Type: An-124

System: The exact onboard system is not specified in the supplied document list

Function: Flexible sealed connection between sections of the documented onboard system

Technical Specification / Type: TU 6-05-041-659-80

Working Medium: Air and gaseous nitrogen; approved aviation oils, hydraulic fluids and fuels listed in the supplied An-124 document, at pressure not exceeding 110 kgf/cm² where stated.

Source Cross-Check: The designation and aircraft applicability were cross-checked between the supplied aircraft lists where corresponding rows were available.

Installation Area: Exact installation position requires documentation for the applicable aircraft

Dimensions: Reliable execution-specific data were not found

Operating Pressure: Reliable execution-specific data were not found

Operating Temperature: Reliable execution-specific data were not found

Mass: Reliable execution-specific data were not found

Interchangeability: Not confirmed; related positions are not replacements

Condition: New

Warranty: 6 Months

YOM: 2026

Stock Status: Pre-Order

Technical Documentation: Supplied lists, product passport, drawing and aircraft documentation when available

All shipments are carried out from our international warehouse in Dubai (UAE), as well as from our partners’ remote warehouses.

In Stock — items available in stock at the Dubai warehouse are dispatched within 5–10 business days after receiving 100% prepayment.

Remote Stock — items available at our partners’ remote warehouses are supplied within an average of 30–45 business days after receiving 100% prepayment.

Pre-Order — made-to-order products are manufactured and delivered within an average of 45–60 business days. Payment terms: 50% advance payment to start production, with the remaining 50% paid before dispatch from the Dubai warehouse after full readiness for shipment.

Returns & Changes (Restocking Fee)
For selected items, a RESTOCKING FEE of 10% may apply in case of return, order cancellation, or changes to the order specifications. This condition applies only to certain products and is confirmed at the order approval stage.

Warranty
All products are covered by a standard 6-month warranty.
Extended warranty is available upon request and is agreed individually; it may affect the final product price.